Tired of your Keurig 2.0 coffee tasting a bit off? It might be time to change the water filter. Hard water can build up mineral deposits in your machine, affecting the taste of your coffee. Additionally, a dirty filter can harbor bacteria that can contaminate your water and coffee. Changing the water filter regularly is essential for maintaining the quality and safety of your Keurig 2.0 coffee maker.
The Keurig 2.0 water filter is located in the bottom of the water reservoir. To change the filter, first remove the water reservoir from the Keurig. Then, open the filter compartment located on the bottom of the reservoir. Remove the old filter and insert the new one, making sure to align it correctly. Close the filter compartment and replace the water reservoir in the Keurig. Finally, run a few cycles of water through the machine to flush out any remaining impurities.
Changing the water filter in your Keurig 2.0 is a quick and easy process that can significantly improve the taste and quality of your coffee. By following these simple steps, you can ensure that your Keurig 2.0 continues to brew delicious, fresh-tasting coffee for years to come.
Installing the New Water Filter
1. Remove the Old Water Filter
Before installing the new water filter, you must first remove the old one. To do this, open the water reservoir door and remove the water reservoir. Locate the water filter holder at the bottom of the water reservoir and twist it counterclockwise to remove it. Once the filter holder is removed, pull the old water filter straight up to remove it from the holder. Discard the old water filter.
2. Activate the New Water Filter
Once you have removed the old water filter, it is time to activate the new one. To do this, you will need to rinse the new water filter for 60 seconds under running water. This will help to remove any loose carbon particles that may be present in the filter.
After rinsing the new water filter, insert it into the filter holder. Make sure that the filter is inserted fully and securely. Once the filter is in place, replace the filter holder into the water reservoir and twist it clockwise to tighten it.
Next, fill the water reservoir with cold water and replace it in the Keurig 2.0. Press the “Brew” button to start the brewing process. The Keurig 2.0 will automatically activate the new water filter. Once the brewing process is complete, the Keurig 2.0 will be ready to use.
Here is a more detailed guide on how to activate the new water filter:
- Remove the old water filter and discard it.
- Rinse the new water filter for 60 seconds under running water.
- Insert the new water filter into the filter holder.
- Replace the filter holder into the water reservoir and twist it clockwise to tighten it.
- Fill the water reservoir with cold water and replace it in the Keurig 2.0.
- Press the “Brew” button to start the brewing process.
- The Keurig 2.0 will automatically activate the new water filter.
- Once the brewing process is complete, the Keurig 2.0 will be ready to use.
3. Troubleshooting
If you are having trouble installing the new water filter, there are a few things you can try. First, make sure that you are using the correct type of water filter. The Keurig 2.0 uses a specific type of water filter, so it is important to use the correct one. If you are using the correct type of water filter, but you are still having trouble installing it, you can try the following:
- Make sure that the filter holder is properly tightened.
- Make sure that the water filter is inserted fully into the filter holder.
- Make sure that the water reservoir is filled with cold water.
- If you are still having trouble, you can contact Keurig customer support for assistance.
Preparing the Keurig for Use
Step 1: Gather Materials
Before you start, make sure you have the following materials on hand:
- New Keurig 2.0 water filter
- Water pitcher
- Soft cloth
Step 2: Remove the Old Filter
Open the Keurig 2.0 by lifting the handle on the top of the machine. Remove the water reservoir by pulling it straight up. Remove the old water filter by turning it counterclockwise and pulling it out. Discard the old filter.
Step 3: Rinse and Prime the New Filter
Rinse the new water filter under cold water for 10-15 seconds. This will remove any loose particles that may be on the filter.
Prime the New Filter:
1. Hold the new filter with the hole facing down.
2. Fill a water pitcher with fresh cold water.
3. Slowly pour water over the filter until it is completely saturated.
4. Shake the filter gently to remove any excess water.
Inserting the New Filter:
1. Insert the new filter into the Keurig 2.0 water reservoir.
2. Turn the filter clockwise until it is snug.
3. Replace the water reservoir back into the Keurig 2.0.
Completing the Water Filter Change
Now that you’ve inserted the new water filter, it’s time to complete the water filter change.
5. Run a Water Filter Cleaning Cycle
To ensure the filter works properly, you must perform a water filter cleaning cycle. Here’s how to do it:
- Place a cup or mug on the drip tray.
- Lift the Keurig handle.
- Press and hold the “Hot Water” and “Cold Water” buttons simultaneously for 5 seconds.
- The cleaning cycle will start and run for about 2 minutes, flushing water through the machine.
- When the cleaning cycle is complete, the “Clean” light will turn off.
Note: The cleaning cycle is essential to remove any residual charcoal dust from the filter.
6. Run a Brew Cycle
After completing the cleaning cycle, perform a brew cycle with plain water to remove any remaining cleaning solution. Here’s how:
- Fill the water reservoir.
- Insert a K-Cup into the machine.
- Press the “Brew” button.
- The machine will dispense a cup of hot water.
7. Discard the First Few Brews
To ensure the water is free of any impurities, discard the first few brews made after changing the water filter. This eliminates any residual taste or filtration byproducts.
8. Enjoy Filtered Water
Once you’ve discarded the first few brews, you can enjoy the benefits of purified water from your Keurig 2.0.
9. Reset the Water Filter Indicator
To keep track of the water filter’s usage, the Keurig 2.0 has a water filter indicator. After replacing the filter, you need to reset the indicator to ensure accurate tracking.
- Press and hold the “Filter” button for 5 seconds.
- The “Filter” light will flash to indicate that the reset is complete.
10. Maintenance Schedule
It’s recommended to change your Keurig 2.0 water filter every 2-3 months or after about 60 uses. To ensure optimal performance and water quality, consider setting a maintenance schedule.
Here’s a table summarizing the maintenance schedule:
| Action | Frequency |
|---|---|
| Change Water Filter | Every 2-3 months or after 60 uses |
| Run a Cleaning Cycle | Every month |
| Reset Water Filter Indicator | After changing the filter |
How to Know When to Change the Water Filter
The Keurig 2.0 water filter should be changed every two to three months, or more often if you notice a decrease in water flow or a change in the taste of your coffee. Here are some signs that it’s time to change the water filter:
1.
Decreased water flow:
If you notice that your Keurig is taking longer to brew a cup of coffee, the filter may be clogged. A clogged filter can restrict the flow of water, causing the brewing process to slow down.
2.
Change in coffee taste:
If your coffee starts to taste different, the water filter may be the culprit. A dirty filter can allow impurities to pass through, which can affect the taste of your coffee.
3.
Visible mold or mildew:
If you see any mold or mildew growing on the water filter, it should be replaced immediately. Mold and mildew can contaminate the water and pose a health risk.
4.
Filter discoloration:
Over time, the water filter may become discolored. This is usually a sign that the filter is nearing the end of its lifespan and should be changed soon.
5.
Mineral buildup:
If you live in an area with hard water, mineral buildup can accumulate on the water filter. This can restrict the flow of water and reduce the effectiveness of the filter.
6.
Bad odor:
If you notice a bad odor coming from the Keurig, it may be a sign that the water filter needs to be changed. A dirty filter can trap bacteria and other contaminants, which can cause the water to smell bad.
7.
Your Keurig’s water filter indicator light is on:
The Keurig 2.0 has a water filter indicator light that will turn on when it’s time to change the filter. This light is typically located on the front of the machine. If the light is on, it’s time to change the water filter.
| Sign | Action |
|---|---|
| Decreased water flow | Change the water filter |
| Change in coffee taste | Change the water filter |
| Visible mold or mildew | Change the water filter immediately |
| Filter discoloration | Change the water filter soon |
| Mineral buildup | Change the water filter |
| Bad odor | Change the water filter |
| Keurig’s water filter indicator light is on | Change the water filter |
Frequently Asked Questions About Keurig 2.0 Water Filters
1. How often should I change my Keurig 2.0 water filter?
You should change your Keurig 2.0 water filter every two to three months, or more often if you notice a decrease in water quality.
2. What are the benefits of using a Keurig 2.0 water filter?
Using a Keurig 2.0 water filter can improve the taste of your coffee, reduce limescale buildup in your machine, and extend the life of your machine.
3. How do I change the water filter in my Keurig 2.0?
To change the water filter in your Keurig 2.0, follow these steps:
- Open the water reservoir lid.
- Remove the old water filter.
- Insert the new water filter into the water reservoir.
- Close the water reservoir lid.
- Run a brew cycle with water only to flush the system.
4. Where can I buy Keurig 2.0 water filters?
You can buy Keurig 2.0 water filters online, at retail stores, or from Keurig directly.
5. How do I recycle my old Keurig 2.0 water filters?
You can recycle your old Keurig 2.0 water filters by bringing them to a local recycling center.
6. Can I use other types of water filters in my Keurig 2.0?
No, you should only use Keurig 2.0 water filters in your Keurig 2.0 machine. Other types of water filters may not fit properly or may not work as well.
7. What is the difference between the Keurig 2.0 water filter and the Keurig Elite water filter?
The Keurig 2.0 water filter is designed for use with Keurig 2.0 machines. The Keurig Elite water filter is designed for use with Keurig Elite machines. The Keurig Elite water filter has a higher capacity than the Keurig 2.0 water filter and can filter more water before needing to be replaced.
8. How long does a Keurig 2.0 water filter last?
A Keurig 2.0 water filter lasts for two to three months, or about 60 to 90 brew cycles.
9. What is the best way to clean my Keurig 2.0 water filter?
The best way to clean your Keurig 2.0 water filter is to run a brew cycle with water only every two to three weeks. This will help to remove any built-up minerals or other contaminants from the filter.
10. How often should I descale my Keurig 2.0?
You should descale your Keurig 2.0 every three to six months, or more often if you notice a decrease in water flow or if the machine is making a loud noise.
11. What is the difference between descaling and cleaning my Keurig 2.0?
Descaling removes mineral buildup from the inside of your Keurig 2.0 machine. Cleaning removes coffee grounds and other debris from the outside of your machine.
12. How do I descale my Keurig 2.0?
To descale your Keurig 2.0, follow these steps:
- Fill the water reservoir with a descaling solution.
- Run a brew cycle with the descaling solution.
- Run a brew cycle with water only to flush the system.
13. What is the best descaling solution for my Keurig 2.0?
The best descaling solution for your Keurig 2.0 is one that is specifically designed for Keurig machines. You can purchase Keurig descaling solution online or at retail stores.
14. How often should I clean my Keurig 2.0?
You should clean your Keurig 2.0 every two to three weeks, or more often if you notice a decrease in water flow or if the machine is making a loud noise.
15. How do I clean my Keurig 2.0?
To clean your Keurig 2.0, follow these steps:
- Wipe down the outside of the machine with a damp cloth.
- Remove the water reservoir and wash it with warm soapy water.
- Remove the drip tray and wash it with warm soapy water.
- Remove the K-Cup holder and wash it with warm soapy water.
- Run a brew cycle with water only to flush the system.
Materials You’ll Need
Before you begin, make sure you have the following materials on hand:
- New Keurig 2.0 water filter
- Empty water reservoir
- Soft cloth or paper towels
- Optional: Measuring cup or pitcher
Step-by-Step Instructions
1. Turn Off and Unplug Your Keurig
Safety first! Always unplug your Keurig before performing any maintenance or repairs.
2. Remove the Water Reservoir
Lift the handle on the back of the Keurig and pull the water reservoir straight towards you.
3. Hold the Filter Handle and Pull Up
Locate the filter handle on the bottom of the water reservoir, just above the filter. Grasp the handle and pull it up firmly.
4. Remove the Old Filter
Once the filter handle is released, the old filter will easily come out of the reservoir.
5. Wet the New Filter (Optional but Recommended)
Although not strictly necessary, it’s a good idea to wet the new filter before inserting it. This helps prime the filter and remove any air bubbles.
6. Insert the New Filter
Align the new filter with the insert on the bottom of the reservoir and push down until it clicks into place.
7. Close the Filter Handle
Once the filter is inserted, push the filter handle down firmly until it locks into place.
8. Reinsert the Water Reservoir
Take the filled water reservoir and slide it back into the Keurig. Ensure it snaps securely into place.
9. Run a Brew Cycle Without a K-Cup
With the water reservoir replaced, insert an empty K-Cup holder into the brewer and run a brew cycle without a K-Cup inside.
10. Repeat Brew Cycle if Necessary
For optimal filtration, it’s recommended to run a second brew cycle without a K-Cup.
11. Discard the Brewed Water
Pour out the brewed water after each brew cycle to remove any remaining impurities.
12. Enjoy Freshly Filtered Coffee
Now that your Keurig 2.0 water filter has been replaced, you can enjoy freshly brewed coffee with improved taste and aroma.
13. Reset the Filter Indicator (Optional)
Some Keurig 2.0 models have a filter indicator light that you can reset after changing the filter. Refer to your Keurig user manual for instructions on resetting the indicator light.
14. When to Change Your Keurig 2.0 Water Filter
Changing the water filter in your Keurig 2.0 regularly helps maintain optimal performance and coffee quality. The frequency of filter changes depends on several factors, including:
- Water hardness
- Frequency of use
- Type of coffee used (darker roasts produce more oils)
As a general guideline, it’s recommended to change your Keurig 2.0 water filter every 2-3 months or after approximately 60 brew cycles.
15. Troubleshooting Common Issues
If you encounter any issues after changing the water filter in your Keurig 2.0, refer to the following troubleshooting tips:
- Filter not fitting properly: Ensure the filter is inserted correctly and aligned with the insert on the bottom of the reservoir.
- Filter handle not closing: Push the filter handle down firmly until it clicks into place.
- Water leaking from the reservoir: Check that the water reservoir is inserted securely and fully snapped into place.
- Brewing cycle not starting: Check that the K-Cup holder is empty and properly inserted, and that the water reservoir is filled and in place.
16. Using Third-Party Water Filters
There are several third-party water filters available for the Keurig 2.0, offering alternative options to the official Keurig filters. Refer to the manufacturer’s instructions for specific compatibility and usage guidelines.
Visual Guide to Changing a Keurig 2.0 Water Filter
1. Remove the Water Reservoir
Begin by grasping the handle on the back of the water reservoir and pulling it straight up to detach it from the Keurig 2.0 machine.
2. Dump Out the Water
Empty the water reservoir over the sink to remove any residual water.
3. Open the Water Filter Door
Locate the water filter door on the bottom of the water reservoir. Press the release button on the left side of the door to open it.
4. Remove the Old Water Filter
Grasp the old water filter and pull it straight down to detach it from the reservoir.
5. Insert the New Water Filter
Carefully align the new water filter with the guides in the reservoir. Push the filter straight up until it clicks into place.
6. Close the Water Filter Door
Once the filter is inserted, close the water filter door by pressing it shut until it clicks.
7. Refill the Water Reservoir
Fill the water reservoir with fresh, cold water up to the “MAX” line.
8. Reinsert the Water Reservoir
Slide the water reservoir back into the Keurig 2.0 machine, ensuring it is securely in place.
9. Prime the Keurig
Turn on the Keurig 2.0 machine and press the “Brew” button without inserting a coffee pod. This will prime the machine and remove any air bubbles.
10. Rinse Two More Times
Repeat step 9 two more times to ensure a thorough rinse.
11. Brew a Cup of Coffee
Insert a coffee pod into the Keurig 2.0 and brew a cup of coffee to enjoy fresh, filtered water.
12. Change the Water Filter Regularly
Keurig recommends changing the water filter every 2-3 months or after every 60 tank fillings, whichever comes first.
13. Reset the Water Filter Indicator
After changing the water filter, reset the water filter indicator light by pressing and holding the “Settings” button on the Keurig 2.0 for 3 seconds.
14. Troubleshooting
If you encounter any problems when changing the water filter, such as the machine not working properly or the water filter not fitting securely, refer to the Keurig 2.0 user manual or contact Keurig customer support for assistance.
15. Water Filter Maintenance
a. Rinse the Water Filter Regularly
Every 2 weeks, remove the water filter and rinse it thoroughly under clean, running water to remove any sediment buildup.
b. Clean the Water Filter Holder
Every month, remove the water filter and clean the filter holder with a soft brush or cloth to remove any accumulated coffee grounds or residue.
c. Descale the Keurig 2.0 Machine
Descale the Keurig 2.0 machine every 3-6 months using a descaling solution. This will remove mineral buildup that can affect the performance of the machine and the water filter.
d. Replace the Water Reservoir Regularly
If the water reservoir develops any cracks or damage, replace it with a new one to maintain the hygiene and functionality of your Keurig 2.0 machine.
16. Benefits of Using a Keurig 2.0 Water Filter
| Benefit | Description |
|---|---|
| Reduces Chlorine Taste | Removes chlorine and other impurities that can affect the taste of water and coffee. |
| Inhibits Scale Buildup | Prevents the accumulation of mineral scale in the Keurig machine, ensuring its longevity. |
| Provides Fresh, Clean Water | Delivers filtered water for brewing coffee, resulting in a pure and flavorful cup. |
| Easy to Install and Replace | The Keurig 2.0 water filter is designed for easy installation and replacement, keeping your machine functioning optimally. |
| Affordable Maintenance | Regular water filter replacements are a cost-effective way to maintain the performance of your Keurig 2.0 machine and enjoy fresh, filtered water. |
How to Change a Keurig 2.0 Water Filter Using a Tool
If you have a Keurig 2.0 coffee maker, you’ll need to change the water filter every few months to keep your coffee tasting its best. Here’s a step-by-step guide on how to do it using a tool:
1. Gather your tools and materials
You will need:
* A Keurig 2.0 water filter
* A screwdriver
* A pair of pliers
2. Unplug your Keurig
Before you start, make sure to unplug your Keurig from the outlet.
3. Remove the water reservoir
Lift the handle on the water reservoir and pull it straight up to remove it from the Keurig.
4. Locate the water filter housing
The water filter housing is located on the bottom of the water reservoir. It is a black cylinder with a white handle.
5. Remove the old water filter
Use the screwdriver to loosen the white handle on the water filter housing. Then, use the pliers to pull the old water filter out of the housing.
6. Insert the new water filter
Take the new water filter and insert it into the housing. Make sure that the filter is inserted all the way and that the white handle is tightened.
7. Replace the water reservoir
Place the water reservoir back onto the Keurig and press down until it clicks into place.
8. Plug in your Keurig
Plug your Keurig back into the outlet and turn it on.
9. Run a cleaning cycle
To remove any residual water from the system, run a cleaning cycle with just water. To do this, fill the water reservoir with water and press the “Clean” button on the Keurig. The Keurig will pump the water through the system and dispense it into a cup.
10. Repeat the cleaning cycle
Repeat the cleaning cycle one more time to ensure that all of the residual water is removed from the system.
11. Enjoy your coffee!
Your Keurig is now ready to use. Enjoy your freshly brewed coffee!
Additional tips
Here are a few additional tips for changing the water filter in your Keurig 2.0:
* Change the water filter every few months, or more often if you have hard water.
* Use a Keurig-brand water filter for best results.
* If you have any trouble changing the water filter, contact Keurig customer service for assistance.
How to Change a Keurig 2.0 Water Filter with a K-Slim Reservoir
1. Gather Your Materials
- New Keurig 2.0 water filter
- Water
- Towel
2. Unplug the Keurig 2.0
Note: Always unplug the Keurig 2.0 before performing any maintenance or cleaning tasks.
3. Remove the K-Slim Reservoir
- Grasp the reservoir handle and pull it straight up to remove it from the Keurig 2.0.
4. Locate the Water Filter Holder
- Turn the reservoir upside down and locate the water filter holder. It is a small, black plastic cylinder located at the bottom of the reservoir.
5. Remove the Old Water Filter
- Push down on the tab on the top of the water filter holder to release the old water filter. The old filter will slide out of the holder.
6. Rinse the Water Filter Holder
- Rinse the inside of the water filter holder thoroughly with water to remove any old filter residue.
7. Insert the New Water Filter
- Take the new water filter out of its packaging and remove the protective cap from the bottom of the filter.
- Insert the new water filter into the water filter holder, pushing down until it clicks into place.
8. Reinsert the Water Filter Holder
- Place the water filter holder back into the bottom of the reservoir and push down until it snaps into place.
9. Fill the Reservoir with Water
- Fill the reservoir with cold, filtered water up to the "Max" line.
10. Reinsert the Reservoir into the Keurig 2.0
- Align the reservoir with the base of the Keurig 2.0 and push down until it clicks into place.
11. Plug in the Keurig 2.0
- Plug the Keurig 2.0 back into the power outlet.
12. Activate the Water Filter
- Turn on the Keurig 2.0 and select the "Brew" button without inserting a K-Cup.
- The Keurig 2.0 will dispense water and automatically activate the water filter.
13. Run 4-6 Brew Cycles
- Run 4-6 brew cycles with water only to rinse out the system and remove any remaining charcoal particles from the new water filter.
14. Reset the Water Filter Indicator
- Press the "Settings" button on the Keurig 2.0.
- Select "Maintenance" and then "Reset Water Filter."
- Follow the on-screen instructions to reset the water filter indicator.
15. Enjoy Filtered Water
- Your Keurig 2.0 is now equipped with a new water filter and is ready to brew delicious, filtered coffee!
16. Replace the Water Filter Regularly
- Keurig recommends replacing the water filter every 2-3 months or after 60 brew cycles, whichever comes first.
17. Clean the K-Slim Reservoir Regularly
- To maintain optimal performance, clean the K-Slim reservoir regularly by removing it from the Keurig 2.0 and washing it thoroughly with warm, soapy water.
18. Troubleshooting
- If you encounter any problems while changing the water filter, refer to the Keurig 2.0 user manual or contact Keurig customer support.
19. Keurig Water Filter Subscription Program
- Keurig offers a water filter subscription program that delivers replacement water filters directly to your door on a regular basis.
20. Additional Tips
- Use filtered water to extend the life of your Keurig 2.0 water filter.
- Avoid using water that contains high levels of minerals or sediment, as this can clog the water filter.
- If you experience any off-tastes or odors in your brewed coffee, it may be time to replace the water filter.
21. Frequently Asked Questions
-
Q: How often should I change the water filter in my Keurig 2.0?
A: Keurig recommends changing the water filter every 2-3 months or after 60 brew cycles, whichever comes first. -
Q: Can I use tap water in my Keurig 2.0?
A: Yes, but using filtered water will extend the life of your Keurig 2.0 water filter and improve the taste of your coffee. -
Q: What type of water filter does the Keurig 2.0 use?
A: The Keurig 2.0 uses a proprietary water filter that is designed to remove impurities and enhance the taste of your coffee.
22. Related Articles
- How to Clean a Keurig 2.0
- How to Descale a Keurig 2.0
- How to Brew Coffee with a Keurig 2.0
23. Conclusion
Changing the water filter in your Keurig 2.0 with a K-Slim reservoir is a quick and easy process that will help you brew delicious, filtered coffee. By following the steps outlined in this article, you can ensure that your Keurig 2.0 is operating at optimal performance and delivering the best possible cup of coffee.
How to Change a Keurig 2.0 Water Filter with a K-Elite Reservoir
If you’re an avid coffee drinker, you know that the quality of your water can make a big difference in the taste of your brew. That’s why it’s so important to regularly clean and change the water filter in your Keurig 2.0 coffee maker. Here’s a step-by-step guide on how to do just that:
1. Turn off the brewer.
This is an important safety step to take before beginning any maintenance on your Keurig.
2. Remove the reservoir.
The reservoir is the clear plastic container that holds water at the back of the brewer. To remove it, simply lift it straight up and out.
3. Find the water filter holder.
The water filter holder is a small plastic box located inside the bottom of the reservoir. It has a black knob on top.
4. Press the button on top of the water filter holder.
This will release the water filter.
5. Remove the old water filter.
Pull the old water filter straight out of the water filter holder.
6. Rinse the new water filter.
Before inserting the new water filter, rinse it under running water for about 10 seconds. This will help to remove any loose charcoal particles.
7. Insert the new water filter.
Push the new water filter into the water filter holder until it clicks into place.
8. Close the water filter holder.
Press down on the black knob on top of the water filter holder to close it.
9. Reinsert the reservoir.
Lift the reservoir up and back into place on the brewer.
10. Turn on the brewer.
The brewer will now be ready to use.
11. Run two cycles with water only.
After changing the water filter, it is important to run two cycles with water only to ensure that the filter is working properly.
Additional Tips:
- Change your Keurig water filter every two to three months, even if you don’t use it regularly.
- If you have hard water, you may need to change the filter more often.
- Never use a water filter that is not specifically designed for your Keurig brewer.
Step |
Action |
Details |
|---|---|---|
| 1 |
Turn off the brewer |
Safety precaution before maintenance |
| 2 |
Remove the reservoir |
Lift straight up and out |
| 3 |
Find the water filter holder |
Small plastic box with a black knob |
| 4 |
Press the button on the water filter holder |
Release the water filter |
| 5 |
Remove the old water filter |
Pull straight out |
| 6 |
Rinse the new water filter |
Remove loose charcoal particles |
| 7 |
Insert the new water filter |
Push in until it clicks |
| 8 |
Close the water filter holder |
Press down on the black knob |
| 9 |
Reinsert the reservoir |
Lift up and back into place |
| 10 |
Turn on the brewer |
Ready to use |
| 11 |
Run two cycles with water only |
Ensure the filter is working |
How to Change a Keurig 2.0 Water Filter with a K-Cafe Reservoir
Materials You’ll Need:
- New Keurig 2.0 Water Filter
- Clean towel
Step-by-Step Instructions:
1.
Locate the Water Filter Housing:
Open the Keurig 2.0 and locate the water filter housing on the right-hand side of the machine, behind the water reservoir.
2.
Remove the Water Reservoir:
Press the button on the bottom left corner of the water reservoir to detach it from the machine.
3.
Eject the Old Filter:
Gently pull on the tab at the bottom of the water filter housing to eject the old filter.
4.
Install the New Filter:
Take the new filter out of its packaging and remove any plastic wrap. Insert the filter into the housing, aligning it with the grooves.
5.
Push the Filter into Place:
Once the filter is aligned, push it firmly into the housing until it clicks into place.
6.
Fill the Reservoir with Fresh Water:
Fill the water reservoir with fresh, cold water and replace it in the machine.
7.
Reset the Filter Indicator:
Press and hold the “Settings” button on the machine for 3 seconds. When the screen displays “Filter,” press the “Reset” button.
8.
Rinse the Machine:
Place a large mug or carafe under the brew head. Select the “Rinse” option on the machine and run the cycle twice to flush out the system.
9.
Brew a Test Cup:
Brew a cup of water to ensure the filter is working properly and the water tastes clean.
Additional Tips:
Flush the System Regularly: Run a rinse cycle with fresh water once a week to keep the machine clean and remove any scale buildup.
Replace the Filter Every 2-3 Months: The water filter should be replaced every 2-3 months, or more frequently if it becomes discolored or clogged.
Use Filtered Water: Using filtered water in your Keurig 2.0 will help extend the life of the filter and improve the taste of your coffee.
Troubleshooting:
| Issue | Solution |
|---|---|
| Water does not flow through the machine | Check the water reservoir, filter, and brew head for any obstructions. |
| Water tastes bitter or has an odor | Replace the water filter and flush the system thoroughly. |
| Water filter indicator light stays on | The filter may not be installed correctly. Reinsert the filter and make sure it clicks into place. |
How to Change a Keurig 2.0 Water Filter with a K-Essential Reservoir
1. Gather Your Materials
Before you begin, ensure you have the following items:
- Keurig 2.0 brewer
- K-Essential reservoir
- New water filter
2. Remove the Old Water Filter
- Lift the reservoir lid.
- Locate the water filter handle on the bottom of the reservoir.
- Turn the handle counterclockwise and remove the old filter.
3. Soak the New Water Filter
- Submerge the new filter in cold water for 5 minutes. This will help activate the filter media.
4. Insert the New Water Filter
- With the handle facing downward, insert the new filter into the reservoir.
- Turn the handle clockwise to tighten the filter.
5. Reset the Water Filter Indicator
- If your Keurig 2.0 model has a water filter indicator light, reset it by pressing and holding the "Brew" button for 5 seconds.
6. Run Four Cups of Water
- Place an empty cup under the brew spout.
- Run four cups of water through the brewer to flush out the system and remove any impurities.
7. Enjoy Clean, Refreshing Coffee
- Your Keurig 2.0 is now ready to brew coffee with clean, filtered water.
Additional Tips
- Change your water filter every two to three months, or more frequently if you live in an area with hard water.
- Use filtered or bottled water for optimal performance.
- If you notice a change in your coffee’s taste or appearance, it may be time to change the water filter.
Troubleshooting
- Water is not dispensing: Check if the water filter is properly installed and tightened.
- Water filter light remains lit: Reset the water filter indicator by following the steps above.
- Coffee has a bitter taste: Replace the water filter with a new one.
- Water filter leaks: Contact Keurig customer support for assistance.
FAQ
How often should I change my Keurig 2.0 water filter?
Every two to three months, or more frequently if you live in an area with hard water.
What happens if I don’t change my Keurig 2.0 water filter?
Your coffee may taste bitter or have a strange appearance. The brewer may also become less efficient or develop leaks.
Can I use tap water in my Keurig 2.0 brewer?
Yes, but it is recommended to use filtered or bottled water for optimal performance and to extend the life of your water filter.
Where can I purchase Keurig 2.0 water filters?
Keurig 2.0 water filters can be purchased online or at most major retailers that sell Keurig products.
| Water Hardness (ppm) | Filter Change Frequency |
|---|---|
| 0-50 | 6 months |
| 51-100 | 3 months |
| 101-200 | 2 months |
| 201+ | Monthly |
How to Change a Keurig 2.0 Water Filter with a K-Mini Reservoir
Follow these steps to change the water filter in your Keurig 2.0 coffee maker with a K-Mini reservoir:
- Remove the water reservoir. Press the release button on the back of the coffee maker and pull the reservoir straight up to remove it.
- Empty the water reservoir. Pour out any remaining water from the reservoir.
- Open the water filter door. Locate the water filter door on the back of the coffee maker and open it by pressing the button on the bottom of the door.
- Remove the old water filter. Grip the old water filter and pull it straight down to remove it.
- Insert the new water filter. Take the new water filter out of its packaging and insert it into the filter housing. Push the filter up until it clicks into place.
- Close the water filter door. Close the water filter door by pressing it shut.
- Fill the water reservoir. Fill the water reservoir with fresh, cold water and replace it in the coffee maker.
- Run the Clean Cycle. Press the “Clean” button on the coffee maker’s control panel and follow the instructions on the screen. The Clean Cycle will help to remove any impurities from the water filter and the coffee maker’s internal components.
Frequency of Replacing the Water Filter
To ensure that your coffee maker is producing the best possible coffee, it is important to replace the water filter regularly. The frequency of replacement will depend on the quality of your water and how often you use your coffee maker. However, as a general rule, it is recommended to replace the water filter every 2-3 months.
Troubleshooting
If you are having trouble changing the water filter in your Keurig 2.0 coffee maker, here are a few troubleshooting tips:
* Make sure that the water filter door is fully open.
* Make sure that the new water filter is inserted correctly.
* Make sure that the water reservoir is filled with fresh, cold water.
* If you are still having trouble, contact Keurig customer support for assistance.
Additional Information
Here are some additional tips for changing the water filter in your Keurig 2.0 coffee maker:
* Use a genuine Keurig water filter. Third-party filters may not fit properly or work as well.
* Rinse the new water filter with cold water before inserting it into the coffee maker. This will help to remove any loose carbon particles.
* If you live in an area with hard water, you may need to replace the water filter more frequently.
* If you notice that your coffee is tasting bitter or has a strange odor, it may be time to replace the water filter.
How to Change a Keurig 2.0 Water Filter with a K-Select Reservoir
Changing the water filter in your Keurig 2.0 coffee maker with a K-Select reservoir is a simple task that can help improve the taste of your coffee and extend the life of your machine. Here are the steps on how to do it:
1. Remove the water reservoir
Grasp the handle on the back of the water reservoir and pull it straight up to remove it from the coffee maker.
2. Locate the water filter
The water filter is located inside the water reservoir. It is a small, cylindrical cartridge with a blue cap.
3. Remove the old water filter
To remove the old water filter, simply turn the blue cap counterclockwise until it is loose. Then, pull the water filter straight up to remove it from the reservoir.
4. Insert the new water filter
To insert the new water filter, simply push it down into the reservoir until it clicks into place. Make sure that the blue cap is facing up.
5. Reset the water filter indicator
Once you have inserted the new water filter, you need to reset the water filter indicator. To do this, press and hold the “Filter” button on the coffee maker for 3 seconds. The water filter indicator light will turn off.
6. Fill the water reservoir with fresh water
Fill the water reservoir with fresh, cold water to the “Max” line. Then, replace the water reservoir on the coffee maker.
7. Run a cleaning cycle
To run a cleaning cycle, press the “Clean” button on the coffee maker. The coffee maker will run a hot water cycle through the machine to clean it.
8. Enjoy your coffee!
Once the cleaning cycle is complete, your coffee maker is ready to use. Enjoy your fresh, delicious coffee!
Troubleshooting
If you are having trouble changing the water filter in your Keurig 2.0 coffee maker, here are a few troubleshooting tips:
* The water filter is not fitting into the reservoir. Make sure that the blue cap is facing up. If the water filter is still not fitting, try removing it and reinserting it.
* The water filter is not clicking into place. Make sure that the water filter is fully inserted into the reservoir. You should hear a click when the water filter is properly in place.
* The water filter indicator light is not turning off. Make sure that you have reset the water filter indicator by pressing and holding the “Filter” button for 3 seconds. If the water filter indicator light is still not turning off, try removing and reinserting the water filter.
FAQs
Here are some frequently asked questions about changing the water filter in a Keurig 2.0 coffee maker:
* How often should I change the water filter? Keurig recommends changing the water filter every 2 months or after 60 tank refills.
* What type of water filter should I use? Keurig recommends using their own branded water filters. However, you can also use third-party water filters that are compatible with the Keurig 2.0 coffee maker.
* Can I use tap water in my Keurig 2.0 coffee maker? Yes, you can use tap water in your Keurig 2.0 coffee maker. However, using filtered water will help improve the taste of your coffee and extend the life of your machine.
| Step | Description |
|---|---|
| 1 | Remove the water reservoir |
| 2 | Locate the water filter |
| 3 | Remove the old water filter |
| 4 | Insert the new water filter |
| 5 | Reset the water filter indicator |
| 6 | Fill the water reservoir with fresh water |
| 7 | Run a cleaning cycle |
| 8 | Enjoy your coffee! |
How to Change a Keurig 2.0 Water Filter with a K-Latte Reservoir
1. Gather your materials.
You will need a new Keurig 2.0 water filter and a K-Latte reservoir.
2. Remove the old water filter.
Open the water filter door on the back of the Keurig 2.0. Grip the old water filter and pull it straight out. Discard the old filter.
3. Wet the new water filter.
Run the new water filter under cold water for about 15 seconds. This will help to remove any air bubbles from the filter.
4. Insert the new water filter.
Insert the new water filter into the water filter door. Press down on the filter until it clicks into place.
5. Close the water filter door.
Close the water filter door and make sure it is securely latched.
6. Prime the water filter.
Press the “Power” button on the Keurig 2.0. The machine will start to prime the water filter. This will take about 2 minutes.
7. Brew a cup of water.
Once the water filter is primed, brew a cup of water to flush out any remaining air bubbles.
8. Enjoy your filtered water!
You can now enjoy your filtered water from your Keurig 2.0.
Additional tips for changing a Keurig 2.0 water filter:
Change your Keurig 2.0 water filter every 2-3 months, or more often if you notice a decrease in water flow or an increase in brewing time.
If you do not change your water filter regularly, your Keurig 2.0 may start to make strange noises or leak water.
You can purchase Keurig 2.0 water filters at most major retailers or online.
**
| Keurig Model | Water Filter Part Number |
|---|---|
| Keurig 2.0 | 3186860001 |
| Keurig 2.0 Plus | 3186861001 |
| Keurig 2.0 Elite | 3186862001 |
**
How to Change a Keurig 2.0 Water Filter with a K-Pro Reservoir
What You’ll Need
Before you begin, gather the following materials:
- Keurig 2.0 K-Pro Reservoir
- Keurig 2.0 Water Filter
- Soft cloth
Step-by-Step Instructions
1. Remove the K-Pro Reservoir
Grasp the handle at the top of the K-Pro Reservoir and lift it straight up off the Keurig 2.0 brewer.
2. Empty the Water Reservoir
Pour out any remaining water from the reservoir into the sink.
3. Access the Filter Housing
Flip the reservoir upside down and locate the filter housing on the bottom. It is a cylindrical component with a lid that twists off.
4. Remove the Old Filter
Unscrew the lid of the filter housing counterclockwise. Grasp the old filter by its handle and pull it straight out.
5. Rinse the Filter Housing
Use the soft cloth to gently rinse out any debris or residue from the filter housing.
6. Insert the New Filter
Remove the new filter from its packaging. Orient the filter so that the “THIS SIDE UP” label is facing upwards.
Insert the new filter into the filter housing and push down until it clicks into place.
Replace the lid of the filter housing by screwing it clockwise until it is secure.
7. Refill the Water Reservoir
Fill the K-Pro Reservoir with fresh, cold water up to the “MAX FILL” line.
8. Replace the K-Pro Reservoir
Align the K-Pro Reservoir over the Keurig 2.0 brewer and lower it into place. Ensure that it is fully seated.
9. Prime the Keurig 2.0
To remove any air from the system, brew two to three “clean” cups without adding any coffee grounds.
10. Enjoy Freshly Filtered Coffee
Your Keurig 2.0 is now ready to brew delicious, fresh-filtered coffee.
How To Change Water Filter In A Keurig 2.0
To change the water filter in a Keurig 2.0, follow these simple steps:
- Open the water reservoir lid.
- Remove the old water filter by pulling it straight up.
- Insert the new water filter into the water reservoir. Push it down until it clicks into place.
- Close the water reservoir lid.
- Run a brew cycle with a cup of water to rinse the new filter.
People Also Ask:
How often should I change the water filter in my Keurig 2.0?
Keurig recommends changing the water filter every 6 months or every 60 tank refills, whichever comes first. However, if you live in an area with hard water, you may need to change the filter more frequently.
What type of water filter does the Keurig 2.0 use?
The Keurig 2.0 uses a charcoal water filter. This type of filter removes impurities from the water, such as chlorine, taste, and odor.
Can I use a third-party water filter in my Keurig 2.0?
Yes, you can use a third-party water filter in your Keurig 2.0. However, Keurig does not recommend using third-party filters. Keurig filters are designed to work specifically with Keurig brewers and may not perform as well as third-party filters.
